When you log in to the drive’s interface, you are met by a clean operating system (Seagate’s NAS OS4) which displays the main features that are installed by default.
#Shadow protect using seagate nas storage install
You can use the address, which will attempt to find it for you, but if that doesn’t succeed, you can download and install the Network Assistant tool off Seagate’s Web site (do a search for it), which will find your drive and ask you whether you want to access the drive’s contents or log in to its Web interface. You’ll want to know what the drive’s IP address is in order to log in to it and make use of all its features. It’s designed so that users don’t have to know anything about the various types of RAID arrays. The drives were already using what Seagate calls its SimplyRAID technology, which is technology that assesses the capacity of the drives that are installed and then applies the best solution for maximising the space while also keeping the data redundant. Setting up the NAS drive was a matter of plugging it in to our wireless router, switching it on, and going through the Windows Network folder to find it and drag files onto it. We had a look at a 2-bay, 8TB device for this review, which came equipped with two 4TB hard drives, a Gigabit Ethernet connection, and a USB 3.0 port. Physically, the Seagate NAS is available as either a 2-bay or a 4-bay unit, with capacities ranging from 2TB to 10TB for the 2-bay, and 4TB to 20TB for the 4-bay.
The Seagate NAS (which is as matter-of-factly named as any tech product on the Aussie market) attempts to be simplistic both in terms of the way the drives are set up, and in the way it can be configured. For this reason, it makes sense that NAS devices for home office users and families be easy to install and maintain. If you ask Seagate, network attached storage (NAS) devices are no longer IT-driven, but instead crossing over to the mainstream.